Secon Systems GmbH, provides the full range of geosynthetic
products such as:
Geomembranes (GM) as sealing layer.
Available in: HDPE , LLDPE, VLDPE and PP in a thickness of 0,50 - 5,0mm, up to a width of 11,20m, with all relevant European Certificates, coextruded, reinforced and in different colours, smooth and sandrough
Geosynthetic Clay Liners (GCL) as sealing layer, alternative to clay Available as needlepunched product, with a bentonit load of 3.500gr/m2 to 5.000gr/m2, all relevant European Certificates
Geotextils (GT) as protection-, filtration- or separation layer alternative to sand
Available in: PP, PE, PES, woven, non-woven, thermal bonded, needle punched, as virgin fibre or recycled quality from 100gr/m2 - 2.000gr/m2
Geodrain (GD), as drainage layer alternative to gravel in slopes, horizontal and vertical
Available as PE geogrid plus geotextil, PE multifilarment plus geotextil,
PE-Particals plus Geotextil, conical formed HDPE Drain plus geotextil
Drainage pipe systems (DP), as drainage for gas or waste water
Available as PE SO or PE 100 as connection pipe or partial penetrated with holes or slots, all relevant diameters and pressure requirements
Geogrids (GG) as reinforcement layer for the mechanical stabilisation of slopes, or unstable subsoils
Available as uniaxial or biaxial grid in HDPE or PES
Geocells (GO) for slope protection, chanal protection and the stabilisation of parking areas
Available in PE, several thickness and height options, perforated or non-perforated, different colours, fixing elements
Erosion control mats (EC) or Gabions (GB) for slope protection, chanal protection
Available as PE- or PP-grid to fill with ground or as natural materials such as woven coconut, woven straw or woven jute, optional with fertilizers
Further geosynthetic products available on costumers demand.
Don't hesitate to contact us
|
